Mobile scaffold

Rolsteigers

Professionele rolsteiger sets

Mobile scaffolds by Euroscaffold are user friendly and robust. Allowing you to work at height efficiently and safely. Made of durable and lightweight aluminium . The mobile scaffolds are easy to set up within a couple of minutes. The mobile scaffolds meet applicable regulations for portable climbing equipment and come with an EN 1004, 1298 and TÜV certificate.

  • Professionele kwaliteit

  • Veilig werken op hoogte

  • Geschikt voor dagelijks gebruik

Rolsteigers

3 opbouwmethoden

1.  Standaard met schoren, tegen de gevel
euroscaffold_rolsteigers_03
STANDARD WITH STRUTS, AGAINST THE FACADE
  • Klassiek opbouwen met schoren

  • Plaatsing tegen de gevel

  • Gebruik de Vario voorloopleuning voor bouwen conform EN1004

2. Enkelzijdige voorloopleuning, tegen de gevel

euroscaffold_rolsteigers_04
ONE-SIDED FRONT RAILING, AGAINST FACADE
  • Opbouwen met voorloopleuning

  • Plaatsing tegen de gevel, ook wel gevelvrij genoemd

  • Geheel conform EN1004

3. Tweezijdige voorloop­leuning, vrijstaand opgebouwd
euroscaffold_rolsteigers_06

TWO-SIDED FRONT RAILING, STAND-ALONE ASSEMBLY

  • Opbouwen met voorloopleuning

  • Plaatsing tegen de gevel

  • Geheel conform EN1004

Variaties

In afmetingen en opbouwen

ASSEMBLY FRAMES
Available in frame widths 75, 90 or 135 with Extrusion or Euro connecting pin. Solid aluminium profiles of 51×2 mm and round welds ensure strong constructions.
1. LOCKING EXTRUSION PIN WITH LOCKING CLIP

The straight extrusion pin (EXT for short) is secured with a separate locking clip. After assembling an assembly frame, the locking clips must be inserted through the upright and the pin, and locked.

2. SELF-LOCKING EUROPIN

The conic Europin is self-locking. The Europin is locked with the integrated locking pin. After an assembly frame is assembled, the pin locks into the assembled assembly frame. The Europin stands for super quick assembly and disassembly.

Doorloopframes

Assembly frames

Available in the frame widths
75, 90 or 135 with Extrusion or Euro connecting pin When the scaffold is positioned on a thoroughfare or when a passage needs to be created, the standard assembly frame is replaced with a walk-through frame.

Available in platform lengths 190, 250 or 305 cm with or without a hatch and with a wooden concrete plywood or lightweight carbon deck.
Both come with a safe non-skid top layer. The platforms come with storm protection on both sides.
For narrower scaffolds (75 or 90 cm), each platform is required to be fitted with a hatch.

Rolsteigers

Meer informatie